Comments on: Setting up an Audiocodes MP-114/118 FXO with Asterisk and FreeSwitch

By: Scott

Scott — Thu, 21 Jul 2011 04:06:02 +0000

Terry Stone,

I’m interested in your setup for the FXO/FXS config. I have the FXO working, and calls from my FXS devices will call out…but no incoming.

Please advise.

By: Saravanan.R

Saravanan.R — Tue, 22 Jun 2010 09:58:20 +0000

I am using Wellgate 2680 IP-EPBx, and wellgate phones working fine, now i got new model IP Phone AudioCodes 320HD, registration process completed. only incoming work, Outgoing problem. how to solve this

By: Jospeh

Jospeh — Fri, 01 Jan 2010 03:08:58 +0000

Terry Stone can you provide me with your Hunt Group setting;
syscon780@gmail.com

By: Santosh

Santosh — Tue, 26 May 2009 08:43:48 +0000

Hi,
I am using GNUGK with Audiocodes MP-118.Everything is working fine for me.I can make the calls.I can hear the voice clearly but the only concern I have now is the call duration in which it is taking the ring time too.So the call duration which is I am taking now is wrong(It should not take the ring time into consideration)
Please help me with this.You can contact me at tripathi_santosh@yahoo.co.in
Regards,
Santosh

By: John Balogh

John Balogh — Sun, 28 Dec 2008 20:52:11 +0000

FYI:
The XML examples in your Freeswitch section are not showing up in Firefox or IE. Maybe need to set them off with a or tag to avoid being interpreted? HTH, JDB

By: Barni

Barni — Tue, 11 Nov 2008 16:27:19 +0000

Hi,
I want to call from asterisk to pstn ext. I have MP-114 hardware and when I call FXO port it give me a ring voice.But I want to call a number.How could I make it? Thanks and best regard

By: Noogie AW

Noogie AW — Mon, 06 Oct 2008 04:03:20 +0000

Hi,

I have setup my FXO – LAN – FXS. the problem now is I can call ext but cannot be call. mean is outgoing fine but incomming cannot. Somebody please help me

By: Chris Athavale

Chris Athavale — Tue, 30 Sep 2008 01:55:57 +0000

Hi Kevin,
Could you direct me to the FXO/FXS setup. I have been trying for some time now, but with little success. Any help would be much appreciated.

Cheers,
Chris A

By: Terry Stone

Terry Stone — Fri, 26 Sep 2008 23:54:54 +0000

I have the FXO/FXS gateway working fine after much hair tearing. The key is to set up trunk groups. I set up a different trunk group for each FXS which I set to register to asterisk per end point and one trunk group for FXO without registering. I have only just done it but will be producing a how to for my own use, can mail it to anyone who is interested once it is written, just mail me.

By: Mukesh Gaur

Mukesh Gaur — Tue, 05 Aug 2008 10:04:45 +0000

I have following setup. PBX1->MP-118-FXO-A ——- LAN ——- MP-118-FXO-B->PBX2

I am able to dial extension no. of PBX2 from PBX1 extension, using VoIP. But I have to wait while dialing. I mean I dial 1001 ( dial tone of MP-118-FXO-A is heard, than I dial 5 and wait and than i heard dial tone of MP-118-FXO-B and than I dial extension no. of PBX2. I want this process automatic, How Can I do that ?