Asterisk Dial Plan Basics

August 5, 2008 by Arthur Miller

I was recently discussing an asterisk implementation at a 12 seat organization, and the customer had some concerns about using a more developed solution such as the Trixbox or Swithchvox products due to budgetary constraints.

He had a fair amount of Linux knowledge and had used asterisk on a limited basis at home. Because he was not completely foreign to the subject he was ready to tackle the project, but needed some additional preparation.

To aid him, I found this link, just posted a couple days ago on Youtube which gives information on setting up a dial plan:

More from: Asterisk Arthur Miller


4 Comments

  • >>>>
    the customer had some concerns about using a more developed solution such as the Trixbox or Swithchvox products due to budgetary constraints.
    >>>>
    Well, of course the TrixBox community edition is free…so I don’t know why there would be budgetary constraints there. Trixbox also includes FreePBX, which might be added on separately to a vanilla Asterisk install, and if you value your time at all, I think one of these two choices makes sense over scratch building a dial plan. Especially with 12 seats, you’ll start to want to get fancy pretty soon…

  • Bill Miller

    Switchvox Free is also free as is AsteriskNOW (upgrade coming soon!).

  • Here is the next video in this series of videos explaining Asterisk dialplan:
    http://www.youtube.com/watch?v=7kNYuqOrP3w

    We used Visual Dialplan for Asterisk in both videos. Visual Dialplan for Asterisk is rapid dialplan development tool for Asterisk dialplan development. It provides similar interface and approach like Visual Basic provides for rapid application development for Windows platform – drag, drop and connect building blocks to make Asterisk dialplan, then configure building blocks to fine tune the dialplan, and finally validate and deploy the dialplan directly from the application. It supports all Asterisk dialplan applications and functions.
    More info about Visual Dialplan can be found at http://www.Apstel.com

  • or maybe the problem with TrixBox and AsteriskNow is that they are a more compleate packaged, and especialy TrixBox has that problem, try to add modifye the code and you are on your own, as you need to rebuild the RPM’s, where a vanilla instalation dont have any compability isues.
    TrixBox and AsteriskNow is greate for private and Very Small Buisness, with littel or no linux knolage.
    as long as it work and they only have problem using the gui, they are safe, but the day somthing go wrong with there installation the either have to reinstall or come runnigen to at PBX reseller
    where with a vanilla asterisk, the user is forced to learn linux, compiling, and configuring, and there for has some basic tools for bug finding

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

  • Featured Posts

  • Popular Posts

  • Read Our Feed

  • Latest

  • VoIP Post Categories

  • Archives