Xorcom Astribank XR0019 (REFRESH)
This Refreshed Product has undergone an extensive 10 Step Process in which it was inspected, tested, fully cleaned, upgraded to the latest firmware and repacked for sale.
Refresh products ship with all the applicable original components including phone, handset cord, base stand, RJ45 cable and manuals.
Xorcom Astribank XR0019 - 8 FXO - USB Channel Bank REFRESH
The Xorcom Astribank XR0019 - 8 FXO - USB Channel Bank is housed in a wall-mountable chassis. A single Astribank supports up to 32 analog ports, or up to 144 analog and PRI channels.
Xorcom Astribank is comprised of versatile and powerful USB Based Telephony Modules that are specifically designed for the Asterisk IP-PBX. Housed in a sleek 1U 19” Chassis, Astribank extends the functionality of Asterisk-based IP-PBX systems and supports all the common telephony lines and trunks: FXS, FXO, BRI, E1/T1 PRI, T1 CAS and E1 R2.
The Astribank XR0019 connects to the Asterisk IP-PBX server via USB 2.0, thus eliminating the requirement for a PCI (E1/T1) card, and even for PCI slots.
The internal design of Astribank is modular, offering a wide variety of FXS, FXO, BRI ISDN and I/O port combinations. Multiple Astribank units may be connected to a single Asterisk server using different USB 2.0 ports, a USB 2.0 hub or USB 2.0 PCI card.
Xorcom Astribank XR0019 - 8 FXO - Product Overview
The internal design of Astribank is modular, offering a wide variety of FXS, FXO, E1/T1 PRI/R2/CAS, BRI ISDN and I/O port combinations. Click here to see Xorcom’s table of available port combinations. Use the Xorcom product configurator wizard to design the best telephony system to match your requirements.
Multiple Astribank units may be connected to a single Asterisk server using different USB 2.0 ports, a USB 2.0 hub or USB 2.0 PCI card.
Modular, Flexible Channel Bank Grows with Your Telephony Needs
A single Astribank USB-connected channel bank supports various combinations of analog and/or digital telephony lines and trunks. See the Astribank models table for suggested configurations.
The Astribank design allows you to let the system grow along with your telephony needs. The digital modules support individual software activation of each port (up to four ports per PRI module, and up to eight ports per BRI module). In other words, if you purchase a single E1/T1 port, you receive hardware that can support up to four active ports. When required, the additional port(s) can be activated remotely, via a software key. Additional analog modules can also be added as needed (each chassis supports up to four modules of eight analog ports each) for a maximum of 32 analog ports per chassis.
Astribank's driver has been included as an official part of Zaptel (now DAHDI) since release 1.2.4 (Feb. 2006), making Astribank integral with Asterisk systems. Today Astribank is tested with Debian, CentOS 5 and trixbox (CentOS 4).
Astribank is the leading solution in high density Asterisk systems, as in hotels, motels, apartment buildings etc. Since most hotels are wired for analog telephony and have analog phones in their guest rooms and offices, Astribank’s advanced services provide a low cost solution that enables hotels to safely and economically migrate to a state-of-the-art VoIP solution.
The need to connect hundreds of analog phones to Asterisk has been a major obstacle in the deployment of Asterisk-based solutions in hotels. Using FXS PCI cards limits the number of ports and therefore does not suit hotel requirements. The only realistic solution is using channel banks.
Minimum Device, Maximum Lines Setup
Channel banks are designed to interface to T1 channels. For each 24-port channel bank a single T1 channel is needed. To support 192 FXS lines, eight 24-port channel banks and two quad-T1 cards are required. The Astribank channel bank provides a better solution; with six competitively priced 32-port models, it eliminates the need for a T1 card. The industry-standard 19" rack-mounted Astribanks can be connected to standard RJ11 front connectors or to a rear connector that bundles all 32 lines into one cable.
Xorcom Astribank XR0019 - 8 FXO - Features
Additional Reasons to use an Astribank USB Channel Bank solution:
- Easy Setup- no need to open the server box and install PCI cards.
- Easy Maintenance - front panel allows convenient maintenance.
- Message Waiting Light - indicating that a message is waiting in the guest’s mailbox.
- Support of Long Telephone Lines – for remote telephone support, up to 2,000 feet for five phones; up to 6,000 feet for a single phone.
- Input & Output Ports - the output ports can activate a door lock, intercom system, appliances, etc. The input ports can be connected to external systems, such as fire or burglar alarms, and initiate a call sequence with appropriate pre-recorded messages.
Refreshed Products come with a standard 6 month warranty with an additional 6 months of coverage available through the PLUS6 WARRANTY.All Refresh Products purchases are non-refundable. Replacement or store credit will be given if product is deemed defective inside of 6 months.
Why Buy Refresh?✚ Value - Refresh products represent an exceptional value as they can be purchased for 20 to 25 percent less than their new equivalent retail price. ✚ Reliability- You can be assured that each product has been fully tested and ready to perform just like it was when originally purchased. ✚ Performance - All Refresh products go through an extensive reconditioning process which includes feature/functionality testing, component replacement (if necessary) and software upgrades. ✚ Warranty - Every Refresh product comes with a standard six month warranty that covers mechanical failures and defects. In addition VoIP Supply also offers an additional six months of protection through the Plus 6 warranty.
Michael RehacDirect: 716-213-6898
Why Pay $529.99 for the Xorcom Astribank XR0019 (REFRESH)?
8FXO Module Installed
USB 2.0 ports to connect to any Asterisk server, no PCI Cards needed!
Asterisk Compatible, 1U Form Factor.