Quintum DX2030 2E1 Multipath Switch w/30 VoIP Channels
Quintum DX2030. MultiPath architecture for easy integration with existing voice and data infrastructure, meaning little or no re-programming of the PBX, or upgrades are required and no need for special dialing plans. Transparent MultiPath Call Routing to intelligently route calls between the PBX, the PSTN, and the IP network to achieve the best combination of cost and quality. This Quintum DX Series gateway can also route calls over IP to reduce costs, and then transparently "hop off" to the PSTN, to reach off-net locations. PacketSaver Technology multiplexing to reduce bandwidth consumption by up to 57% by combining voice packets from multiple calls into a single packet. Universal Dial Plan that provides a programmable dial plan so Tenor to be integrated into any network environment. Auto Provisioning interface allows the Tenor solution to be deployed worldwide, and configured automatically by acquiring the configuration information from a central server, upon installation. The same auto-provisioning capability allows the Tenor to be configured from a VoIP application, thus supporting a single user interface between the VoIP application and the Tenor configuration.
Quintum DX2030 2E1 Multipath Switch w/30 VoIP Channels
Unified Communications Proxy (UCP) provides 'Any to Any' connectivity: SIP-SIP, TDM-TDM and SIP-TDM, for easy integration with any network. NATAccess™ to allow Tenor to operate behind NAT firewalls to translate internal IP addresses into public addresses when a VoIP call is established with an outside party. Remote Management for anywhere, anytime remote management even behind NAT firewalls with Quintum's Remote Management Session Server.
Quintum DX2030 Features:
- Supports (2) E1 Connections
- 30 VoIP Channels
- Perfect for enterprises and service providers deploying VoIP applications
Didn't find the VoIP Gateway you were looking for? Check out our complete selection of Quintum Gateways.
We're sorry, there are no downloads available at this time.
- Manufacturer
- Quintum Technologies
- # of RJ45 Ports
- 2
- # of T1/E1 Ports
- 2
- # of VoIP Channels
- 30
- Auto Provisioning
- Yes
- Codec Support
- G.711 u/a law, G.723, G.729 a/b
- Digital Signalling Type
- T1, E1
- Echo Cancellation Support
- G.168
- Fax Support
- T.38
- Future Scalability
- No
- Modular
- No
- Peripheral Ports
- RS-232
- Power Adapter Included
- Yes
- Protocol Support
- SIP, H.323
- Provisioning Method
- WEB GUI, CLI, Voice IVR, RADIUS
- PSTN Lifeline / Failover
- No
- Rackmountable
- Yes
- Redundant Power Supply Option
- No
- Voice Signalling Method
- NI2, PRI, NET5/EURO ISDN, T1 CAS, E1 CAS, DASS2
Why Pay $3,077.00 for the Quintum DX2030 2E1 Multipath Switch w/30 VoIP Channels?
Supports (2) E1 Connections
30 VoIP Channels
Perfect for enterprises and service providers deploying VoIP applications
For advice, reviews and industry insight... be sure to follow us online.
Buying frequently or in volume? Save BIG with our Wholesale Buyers Club
Learn More
Get started on the path to success with these VoIP resources
Start Now
