Sangoma Vega 400 Fractional T1/E1 Digital Gateway

Sangoma Vega 400 Fractional T1/E1 Digital Gateway

The Sangoma Vega 400 digital gateway connects IP networks with digital telephony equipment via T1 or E1 connections. The VEGA-VS0111-016 comes licensed to support 16 channels through a fractional T1/E1.

Sangoma Vega 400 Overview

All Vega 400 gateways are supplied with four E1/T1 interfaces which are always fully available regardless of the license which has been purchased. The unit is purchased pre–licensed to suit the initial requirements of the customer for the quantity of concurrent VoIP calls desired through to 120 VoIP channels. Future expansion is easily achieved in the field & can be provisioned by means of further licenses and expansion modules.Each E1/T1 interface can be independently configured as network side or terminal side. The Vega 400 gateway can therefore be connected to a PBX & the PSTN simultaneously. This configuration provides:

• * No disruption to the configuration of existing equipment
• * Flexibility & choice for call routing

The Vega 400 gateway incorporates an additional four RJ45 sockets and fails over to these during outages. This resource can be utilized to achieve hardwired connection from the PBX to the PSTN for instances when the Vega is installed between the two. Or alternatively to failover to a back-up Vega 400 & thereby providing dual redundancy.

Sangoma Vega 400 Features:

Interfaces

VoIP

• SIP
• H.323 version 4
• Audio codecs:
  • G.711 (a-law/µ-law) (64 kbps)
  • G.729a (8 kbps)
  • G.723.1 (5.3/6.4 kbps)
  • Clearmode
  • GSM (Optional)
• FAX Support – up to G3 FAX, using T.38
• Modem Support – up to V.90, using G.711
• Up to 120 VoIP channels

Telephony Interfaces

Primary Rate ISDN (User configurable NT/TE):

4 x E1

• Euro–ISDN
• ISO QSIG
• VN4
• QSIG Feature Transparency (H.323)
• CAS R2MFC

4 x T1

• NI1/NI2
• AT&T 5ESS
• DMS100
• CAS (RBS)
  • E&M wink start
  • Loop start
  • Ground start
• ISO QSIG
• QSIG Feature Transparency (H.323)
• 4 x Bypass relays terminating onto 4 x RJ45 for resiliency

LAN Interfaces

• 2 RJ–45s, 10 BaseT/100 BaseTX, full/half duplex



Features

Identification

• Caller ID presentation
• Caller ID screening allows connections to be accepted only from selected call sources
• SIP Registration & Digest Authentication
• H.323 gatekeeper registration

Operations, Maintenance & Billing

• HTTP(S) web server
• RADIUS Accounting & Login
• Remote firmware upgrade:
  • Auto code upgrade
  • Auto configuration upgrade
• SNMP V1, V2 & V3
• TFTP/FTP support
• VT100 – RS232/Telnet/SSH

Routing & Numbering

• Dial Planner – sophisticated call routing capabilities, standalone or gatekeeper/proxy integration
• Direct Dialing In (DDI)
• SIP registration to multiple proxies
• NAT traversal

Security & Encryption

• Media – SRTP (optional)
• SIP – TLS (optional)
• Management – HTTPS, SSH Telnet
• Configurable user login passwords
• Enhanced Network Proxy (ENP) (optional)

Call Quality

• Adaptive jitter removal
• Comfort noise generation
• Silence suppression
• 802.1p/Q VLAN tagging
• Differentiated Services (DiffServ)
• Type of Service (ToS)
• QoS statistics reporting
• Echo cancellation (G.168 up to 128ms)



Hardware

Certification

EMC (ClassB)
• EN55022
• EN55024
• FCC Part 15
• AS/NZS3548
• VCCI
Safety
• EN60950
• IEC60950
• UL60950
• AS/NZS60950
Telecoms (ISDN)
• E1: TBR4
• T1: FCC Part 68
• T1: CS-03

Environmental

• 0° .. 40°C
• 0% .. 90% humidity (non-condensing)

Indicators

LED:

• Power
• ISDN: NT/TE & Link up
• LAN: Speed, Activity

Physical Dimensions

• 437mm (17.2") x 43mm (1.7") x 275mm (10.8") width/height/depth
• Weight: 6.5kgs
• Rackmount: brackets supplied 483mm (19") 1U

Power

• 100..240 VAC, 47..63 Hz, 1..0.5 A
• -48V DC also available, 1.2A (Max)

Program Storage

• Code & configuration data are stored in FLASH & executed from RAM