Ubiquiti U-LTE-US UniFi Redundant WAN over LTE

Ubiquiti Networks U-LTE-US UniFi LTE 802.3at US Overview

Keep your business operating with the Ubiquiti Networks U-LTE-US UniFi Redundant WAN over LTE. The Ubiquiti U-LTE-US uses the AT&T LTE network which supplies backup internet in case it were to ever go down and makes sure that your UniFi WAN Network is always operating. Each defined network can be easily set-up to use LTE failover when it is needed. However, coverage depends on the AT&T LTE network. 

The Ubiquiti Network U-LTE UniFi LTE can be stored in any area since it can be powered by 802.3at PoE+ from a UniFi PoE switch. It's not necessary to have it stored in the server room or network closet. Keep in mind though you will want to mount the U-LTE in a place that has a strong signal from the AT&T LTE Network. Mounting options include wall, adhesive, or desktop mounting to fit your specific environment.

The configuration is simple anyone could do it. All you need to do is plug-in to any switch port in your corporate network, turn on the switch by choosing a plan and enter in how you will be paying, and enjoy the first 1 GB for free! The plan is $5 a month and includes 1 GB, then it is $5/GB until the end of May 2021

Speed and coverage vary depending on the AT&T Network Coverage. 

Ubiquiti Networks U-LTE-US UniFi 802.3at US Features

• 2x2 Category 4 LTE Radio
• External LTE Antenna Interface
• PoE In/Out Flexibility
• Max Power Consumption: 8.5W
• Power Supply: UniFi PoE Switch
• Voltage Range: 44 to 57VDC
• LTE Category: Cat 4
• LTE Bands: B2/4/5/12
• Mounting: wall or desktop
• Certifications: FCC, IC, PTCRB, AT&T