Xorcom XR 0024 8FXS Module
These private exchange 8-port FXS modules support the Xorcom SPI (Serial
Peripheral Interface) internal Astribank bus.
Voltages and currents (supplied by the e-main control module):
Logic 3.3 VDC @ up to 0.3 amp
Low battery voltage (off-hook) -24 to -30 Vdc @ up to 360 Milliampere
High battery voltage -80 to -92 Vdc produces ring -80-92 Volts ring
alternate current, Sinusoidal, software programmable via the Asterisk
XPP (Xorcom Peripheral Protocol ) driver.
The modules support 100% electronic telephony operation (no relays) based
on solid-state SLICs (Subscriber Line Interface Cards), with built-in surge
protection of up to 1,500 Volts.
Caller ID support
MWI (Message Waiting Indicator) support
The modules include eight RJ11 ports for line connection. Each port has two
LEDs (Light Emitting Diodes).
The green LED indicates port status:
Solid Green = off-hook, engaged line
Blinking green = ringing
The Red LEDs are used for special indications (on, synchronized, active) when
the module is installed on the first (leftmost) position in an Astribank.
Each module has an on-board 16-pin male connector to support the TCO
(telecom connector) option on the Astribank.
The XR0045 is similar to the XR0024, but also includes digital input-output
capability. The two relay outputs are capable of carrying up to 2 Ampere at up
to 220 V. The four digital inputs are designed for dry switch operation only.
The XR0045 must be installed in the first (leftmost) slot only.
To assure reliable, long term operation of the FXS modules forced-air cooling