Digium Switchvox Releases new SMB Appliances

On September 30th, Digium announced the release of three new Switchvox Digium appliances. The AA65, AA305, and AA355 were all introduced and taking the place of the older AA60, AA300, and AA350 SMB appliances. The new appliances will boast a current branding change from Digium with front panel LCD and controls. Here is a nice a look at the new branding and LCD support.

The front panel LCD will for the following changes to the configuration as well as show current status of the appliance:

View System Info
- Administer your PBX at https://IP/admin
Configure Network
- Active Interface
  - eth1
  - eth0
Set DHCP / Static
- DHCP
- Static
Change IP Address
- 192.168.0.20 (Note this is an example, not a default IP)
Change Subnet mask
- 255.255.255.0 (Note this is an example, not a default subnet mask)
Change Gateway
- 192.168.0.1 (Note this is an example, not a default gateway)
Change DNS Server
- 192.168.0.100 (Note this is an example, not a default DNS server)
Reboot PBX
- Yes / No
Shutdown PBX
- Yes / No
Reset HTTPs Certificate
- Yes / No
Tech Support Access
- Enable Yes / No
Restore Web Access
- Yes / No
Reset Administrator Password
Change LCD Password

The new appliances also support updated hardware specifications in comparison to the older AA60, AA300, and AA350.

Memory / RAM:
AA60 – 512MB > AA65 – 2GB
AA300 – 1GB > AA305 – 2GB
AA350 – 2GB > AA355 – 2GB

Storage/ HDD:
AA60 – 80GB > AA65 – 80GB
AA300 – 80GB > AA305 – 160GB
AA350 – 80GB >AA355 – 160GB (2x 160GB HDDs in RAID 1 configuration)

The biggest hardware change comes to the AA65 which now comes in a new chassis to provide easy rack-mountability (something that the AA60 lacked). The new chassis also supports an internal power supply (the AA60 had an external lap-top like power supply), and changes have been made to the internal fan positioning to make it easier to install Digium PCI telephony cards. Here is a nice look at the rear of the new chassis:

There are no changes in regards to the SMB software; however all of the new appliances will ship with SMB 4.0 or higher. These appliances cannot be downgraded and will only support SMB software. If you are looking for Switchvox’s SOHO software, Digium will keep the AA60SOHO appliance to satisfy that offering.

Switchvox SMB 4.0 Datasheet

If you have any questions on these new changes to the Switchvox product line, please contact us and our knowledgeable sales staff will be here to answer your questions.

Garrett Smith

Garrett is the former VoIP Supply CMO.

Next The First 100 percent reliable Fax over IP Solution….Introducing the FAXXBOCHS!!! »

Previous « Unidata - Always innovating and on the cutting edge

View Comments

pala jean jacques says:

August 23, 2013 at 6:04 AM

Bonjour,

Je souhaite avoir plus d'information sur l'installation et configuration du switchvox A305 avec un document à l'appui.
Cordialement.
JJPALA