Our partner Bandwidth has alerted us that there is potentially a problem with the password security of EdgeMarc Gateways and Session Border Controllers (ESBC).
This might affect all EdgeMarc device owners. In short, the default Username / Password of “Root” / “Default” of these devices have been compromised.
However, if you changed your log in credentials when you programmed your EdgeMarc device then you are probably safe. If you were never prompted to change the default username / password you may not have thought to change it.
From the Bandwidth announcement, here’s how to tell if you need to change your password and the steps to take:
If you are unsure if your specific device has been compromised, you can take the following steps to investigate. However, it is still highly recommended to change the password:
- In the EdgeMarc GUI, under ‘System’ click on “Client List”. If there are any entries listed other than known and local IP addresses, there is a strong possibility that your device has been compromised. To resolve, remove the offending IP address.
Additionally, the following steps should be taken to to ensure a secure device:
- Disable PPTP (Point-to-Point Protocol) – Under PPTP server > Username, ensure there is no user built unless it is a known user.
- Disallow WAN clients – Under VoIP ALG, uncheck both the ‘allow clients on WAN’ option, as well as the ‘Enable LLDP’ option.
- Verify no additional scripting has taken place, by looking under ‘User Commands’. Specifically, if the following script is present, it will need to be deleted:
ln -sf /etc /etc/images/m.txt
chmod 777 /etc/images/m.txt/config/passwd
sed -i -e s’_'”501″‘_'”0″‘_’ /etc/images/m.txt/config/passwd
sed -i -e s’_'”501″‘_'”0″‘_’ /etc/images/m.txt/config/passwd
sed -i -e s’_'”/etc/images”‘_'”/”‘_’ /etc/images/m.txt/config/passwdNote: Some EdgeMarc screens within the GUI save changes while you’re making them, and others require you to hit a ‘submit’ button. Please take note of this while making your changes.
Thank you to Bandwidth for bringing this problem to our attention.
If the above information did not help you and you still have concerns, please call us at 800-398-8647.
Cutting-edge IP Paging Solutions are revolutionizing communication across diverse industries, providing more than just standard…
Need to factory reset your password of your Polycom VVX phone but having a hard…
https://www.youtube.com/watch?v=hRbtcblrou0&t=23s SIP Chats is back with a brand-new episode! We're excited to have David Richards…
https://www.youtube.com/watch?v=akxEeUSD3P8 Get your dose of VoIP News for April with our VoIP News Update! This…
How many different acronyms do we have to remember nowadays? And we also have to…
One of the biggest challenges among organizations today is security and creating seamless integration between…