Free Rhino T1/E1 PCI Card at VoIPSupply.com

From now until April 15th, VoIPSupply.com, in conjunction with Rhino Equipment, is offering customers a Free Rhino T1/E1 PCI card when you purchase a Rhino 24 Port Channel Bank!

The Rhino T1/E1 PCI card offers the following:

* Asterisk soft PBX tested and ready
* Zaptel compliant open source module source code included
* T1/E1 – PRI/ISDN embedded CSU
* Line buildout software selectable
* Custom Rhino PCI interface chip means no wasted CPU overhead
* Fractional voice and data capable
* Zttool compliant interface
* Field software upgradable
* T1 crossover cable included
* Alarm and Link status LEDs visible from the rear bracket
* E&M, PRI, Loop, Ground, Kewl, etc, signaling protocols
* Distinctive ring in Loop start mode
* Caller ID enabled in Loop start mode
* 5-year limited warranty
* Unlimited Support

CSU Features:

* All Rhino PCI T1 cards feature a single chip integrated CSU with both LIU and Framer, that is software controlled and software programmable – no jumpers
* Complete T1/DS1/ISDN-PRI/J1 Transceiver Functionality
* Long-Haul and Short-Haul Line Interface for Clock/Data Recovery and Waveshaping
* Crystal-Less Jitter Attenuator
* Fully Independent Transmit and Receive Functionality
* Single chip line interface unit (LIU) and Framer
* Power Consumption: Maximum power consumption (under full load) will not exceed 100W.

Zaptel Selections

* T1: D4 or ESF, AMI or B8ZS
* Line buildout selections: 0-133 feet or 0db, 133-266 feet, 266-399 feet, 399-533 feet, 533-655 feet, -7.5db, -15db, -22.5db
* Loopback modes under software selection (zttool)

Rhino products are tough. In the rare case of trouble, our technical support staff is ready to give you the support you need, when you need it. Our 5-year limited warranty means that you can be confident that Rhino will always work hard and work well in your T1 application.