On Friday, July 3rd our offices will be closed. You can still make purchases from our website. However, our staff will not be available to assist you.
We will resume normal operating hours on Monday, July 6th.
Thanks for shopping with VoIP Supply!
Pricing will now be shown in Canadian dollars, click the 'SHOP USA' link at the top to revert to show USD.
Quintum AXM800. MultiPath architecture for easy integration with existing voice and data infrastructure, meaning little or no re-programming of the PBX, or upgrades are required and no need for special dialing plans. Transparent MultiPath Call Routing to intelligently route calls between the PBX, the PSTN, and the IP network to achieve the best combination of cost and quality. The Tenor can also route calls over IP to reduce costs, and then transparently "hop off" to the PSTN, to reach off-net locations. PacketSaver Technology multiplexing to reduce bandwidth consumption by up to 57% by combining voice packets from multiple calls into a single packet. Universal Dial Plan that provides a programmable dial plan so Tenor to be integrated into any network environment. Auto Provisioning interface allows the Tenor solution to be deployed worldwide, and configured automatically by acquiring the configuration information from a central server, upon installation. The same auto-provisioning capability allows this Quintum AX Series gateway to be configured from a VoIP application, thus supporting a single user interface between the VoIP application and the Tenor configuration.
Unified Communications Proxy (UCP) provides 'Any to Any' connectivity: SIP-SIP, TDM-TDM and SIP-TDM, for easy integration with any network. NATAccess™ to allow Tenor to operate behind NAT firewalls to translate internal IP addresses into public addresses when a VoIP call is established with an outside party. Remote Management for anywhere, anytime remote management even behind NAT firewalls with Quintum's Remote Management Session Server.
Q: Hi there, currently my company uses 2 standard 30-channel E1 connections (60 trunks total) to the carrier. I want to convert my E1's to SIP connections possibly using the Tenor series DX or equivalent, so can you recommend a configuration using the Tenor Series DX switch(s), that will work equal to if not better than my current E1 configurations? thank you so much
A: Quintum AXM800 8FXO VoIP Gateway--- is an analog gateway you mentioned that you have E1 connections. You may want to look for a gateway that supports E1