Cisco VWIC2-1MFT-T1/E1= (Discontinued)

Skip to the beginning of the images gallery

The Cisco VWIC2-1MFT-T1/E1= has been discontinued by the manufacturer. There are no comparable replacements at this time. Please call 1-800-398-8647 or chat with an expert for a recommendation.

Availability: Out of stock

SKU

02-111858

MPN

VWIC2-1MFT-T1/E1=

Cisco 1-port T1/E1 for voice (ISDN Primary Rate Interface [PRI] and channel associated signaling [CAS]); data is not supported

Details

Cisco VWIC2-1MFT-T1/E1 VIC Card

The Cisco VWIC2-1MFT-T1/E1 1 port T1/E1 multiflex interface card support generic single-port T1 or E1 trunk interfaces for voice, data, and integrated voice and/or data applications. This card provide basic structured T1 service, as well as structured and unstructured E1 services.

Cisco VWIC2-1MFT-T1/E1 Product Overview

Application/Usage: Voice

Interfaces/Ports: 1 x T1/E1 WAN

Interfaces/Ports Details: 1 x RJ-48C T1/E1 WAN

Data Transfer Rate: 1.54 Mbps T1 / 2.05 Mbps E1

Management: MIB and Simple Network Management Protocol (SNMP)

Protocols: SNMP

The card include an integrated data service unit/channel service unit (DSU/CSU)

Shielded cables STP Cat 5 should be used on E1 ports

Full support for T1 Facility Data Link (FDL)

Controller local loopbacks

Controller remote loopbacks

Firmware to support T1 and E1 Layer 1 homologation

User-initiated VWIC reset and field-programmable gate array (FPGA) download

Voice support (includes DS0-group and PRI-group configuration)

Drop and insert capability

MFT VWIC2s have an onboard slot for a multiflex trunk dedicated echo cancellation module (EC-MFT-32 and EC-MFT-64), offering an enhanced echo cancellation capability for demanding network conditions.

Product Details/Specifications