Sangoma Vega 100G (Refresh)
The Sangoma Vega 100G is a 1 T1/E1 digital gateway that can be used to bridge PSTN to an IP PBX, SIP to a legacy analog PBX, or migrate from a legacy PBX to an IP PBX without installing a Sangoma T1 card into your server. This gateway supports up to 30 channels and supports FAX up to G3 FAX, using T.38.
Sangoma Vega 100G Overview
The Sangoma Vega 100G is a 1 T1/E1 digital gateway that can be used to bridge PSTN to an IP PBX, SIP to a legacy analog PBX, or migrate from a legacy PBX to an IP PBX without installing a Sangoma T1 card into your server. This gateway allows for open nonproprietary interfaces and its code and configuration data are stored in FLASH & executed from RAM. The Sangoma Vega 100G supports up to 30 channels and FAX up to G3 FAX, using T.38.
Sangoma Vega 100G Features and Specifications
The Vega 100 gateway support the following signalling schemes:
ETSI ISDN
NI1, NI2, AT&T 5ESS, DMS100
ISO QSIG Basic Call & QSIG feature transparency
Channel Associated Signalling (CAS)
VoIP
- SIP
- H.323 version 4
- Audio codecs:FAX Support up to G3 FAX, using T.38
- G.711 (a-law/-law) (64 kbps)
- G.729a (8 kbps)
- G.723.1 (5.3/6.4 kbps)
- Clearmode
- Modem Support up to V.90, using G.711
- Up to 30 VoIP channels
Telephony Interfaces
Primary Rate ISDN (User configurable NT/TE):
E1
- EuroISDN
- ISO QSIG
- VN4
- QSIG Feature Transparency (H.323)
- CAS R2MFC
T1
- NI1/NI2
- AT&T 5ESS
- DMS100
- CAS (RBS)ISO QSIG
- E&M wink start
- Loop start
- Ground start
- QSIG Feature Transparency (H.323)
- Bypass relays terminating onto RJ45 for resiliency
LAN Interfaces
- 2 RJ45s, 10 BaseT/100 BaseTX, full/half duplex
Identification
- Caller ID presentation
- Caller ID screening allows connections to be accepted only from selected call sources
- SIP Registration & Digest Authentication
- H.323 gatekeeper registration
Operations, Maintenance & Billing
- HTTP(S) web server
- RADIUS Accounting & Login
- Remote firmware upgrade:SNMP V1, V2 & V3
- Auto code upgrade
- Auto configuration upgrade
- TFTP/FTP support
- VT100 RS232/Telnet/SSH
Routing & Numbering
- Dial Planner sophisticated call routing capabilities, standalone or gatekeeper/proxy integration
- Direct Dialing In (DDI)
- SIP registration to multiple proxies
- NAT traversal
Security & Encryption
- Management HTTPS, SSH Telnet
- Configurable user login passwords
Call Quality
- Adaptive jitter removal
- Comfort noise generation
- Silence suppression
- 802.1p/Q VLAN tagging
- Differentiated Services (DiffServ)
- Type of Service (ToS)
- QoS statistics reporting
- Echo cancellation (G.168 up to 128ms)
Hardware
Certification
EMC (ClassB)
- EN55022
- EN55024
- FCC Part 15
- AS/NZS3548
- VCCI
Safety
- EN60950
- IEC60950
- UL60950
- AS/NZS60950
Telecoms (ISDN)
- E1: TBR4
- T1: FCC Part 68
- T1: CS-03
Environmental
- 0 .. 40C
- 0% .. 90% humidity (non-condensing)
Indicators
LED:
- Power
- ISDN: NT/TE & Link up
- LAN: Speed, Activity
Physical Dimensions
- 437mm (17.2") x 43mm (1.7") x 275mm (10.8") width/height/depth
- Weight: 6.5kgs
- Rackmount: brackets supplied 483mm (19") 1U
Power
- 100..240 VAC, 47..63 Hz, 1..0.5 A
- -48V DC also available, 1.2A (Max)