The Yealink SIP-T19P E2 Single Line VoIP Phone is an entry level product with dual 10/100 Ethernet ports and full-duplex speakerphone.
Yealink SIP-T19P E2 Entry Level IP Phone Overview
The T19P E2 has dual 10/100 network ports and features IPv6, SRTP/ HTTPS/ TLS, VLAN and QoS for extended network use. The integrated PoE allows for easy, flexible and secure installation. The T19P E2 is designed for business environments with headset compatibility and wall mountable.
The T19P E2 comes pre-loaded with the most current version of firmware from Yealink, with the V80 version.
Yealink SIP-T19P E2 Features and Functions:
1 Line Appearances
Dual-port 10/100 Ethernet
SIngle SIP account
Full-duplex hands-free speakerphone
No expansion modules supported
RJ9 Headset Port
Desktop with footstand (detachable), Wall-mountable
Supports PoE, Power Supply available separately
Manufacturer
Yealink
Model
SIP-T19P-E2
High Definition
Yes
Protocols Supported
SIP
# of Ethernet Ports
2
Yealink SIP-T19P E2 Single Line VoIP Phone Downloads
Q: At one client site, i replaced T19P set with New T19P E2. Performed same settings as previous but the SIP phone did not work. The set is connected as SIP extension of Unify Openscape Business X8 system.
The set was unable to dial , than i set TCP as network connectivity option which was previously set as UDP. the set although registered and start dialing but still one way speech resulted. All codecs were set as previous and matched with settings in the PABX system.
Kindly advise if there is any special entry or configuration required which was not available in the previous software or model.
Thanks
A: Hi Rehan,
Please submit a help ticket to support@voipsupply.com