Advanced Network Devices ZONE-LO Zone Line Out Controller Overview
The Advanced Network Devices (AND) ZONE-LO Zone Line Out Controller connects to your existing amplifier to make your analog speakers IP-enabled. Along with AND Power over Ethernet (PoE/PoE+) devices, all IP-enabled devices connect to existing data networks, allowing simultaneous broadcasting to both phones and speakers. The ZON-LO is easy to install. All it requires is a PoE CAT 5 connection to a network (up to 300 feet), no power cord needed. The AND ZONE-LO also features full multicast and broadcast support. Easily send audio to individual, multiple, or all devices simultaneously (when combined with additional AND zone controllers). The AND ZON-LO Zone Line Out Controller even contains a sound masking feature. Generate a configurable pink noise via push button or program and you're good to go.
Advanced Networks Devices ZONE-LO Features
- Configurable volume
- Field upgradeable
- No power cord needed
- Ful multicast and broadcast support
- Unbalanced line level audio via RCA connector
- Line Out signal level up to 2 Vpp
- Generate pink noise via button or program
- 10/100 Mbps
- PoE (IEEE802.3af) 15.4 W or PoE+ (IEEE802.3at) 30.0 W
- SIP, IPv1, HTTP, SLP, TFTP, NTP, SNMPV1 & SNMPV2c, DHCP, IGMP, ICMP, TCP/IP, UDP, MDNS & MDNS-SD