Cyberdata SIP Dual Relay Controller 011484

Cyberdata SIP Dual Relay Controller 011484

The Cyberdata Dual Relay Controller can be added to your network's IP security infrastructure to offer network monitoring and dual relay controls. The Cyberdata Dual Relay Controller is PoE powered using 12V @ 500 mA. An external power source can also be used. All events are logged with a battery-backed up time stamp, which can be downloaded. The SIP Dual Relay Controller can also activate its relays with the press of a button. CyberData’s Remote Call Button (part number 011508, sold separately) can be wired into the button contacts of the SIP Dual Relay Controller to manage the onboard relays in addition to the SIP DTMF functionality. Applications include electronic door strikes and other high current machine control as well as fire, security or alarm panels, air quality or temperature sensors or devices that you would control from a distance.

Cyberdata Dual Relay Controller 011484 Features and Specifications:

• Two high amperage relays, activated by DTMF or the web, can activate for a set time (pulse), indefinitely, or as an airlock Tamper alert can generate a SIP call to an extension 
• Multicast page and/or SIP call on state of the sensor as configured by the user 
• Time stamped access log Support for security code to prevent unwanted SIP calls 
• Supports user-uploadable messages 
• Dual 12A relays 
• NO/NC contacts 12V @ 500 mA for direct powered strikes 
• Opto-isolated sense inputs 
• Device status LED 
• Wall mounting 
• Cable strain relief TLS 1.2 and SRTP enhanced security for IP endpoints in a local or cloud-based environment 
• Autoprovisioning via HTTP, HTTPS, or TFTP HTTPS web based configuration. 
• Configurable event generation for device health and status monitoring 802.11q VLAN tagging Web-based upgradeable firmware Support for Cisco SRST resiliency

Complimentary SKUs:

• 011508, 011511, 011512, 011457, 011376, 011233