Advanced Network Devices ZONE-LO Zone Line Out Controller

Advanced Network Devices ZONE-LO Zone Line Out Controller Overview

The Advanced Network Devices (AND) ZONE-LO Zone Line Out Controller connects to your existing amplifier to make your analog speakers IP-enabled. Along with AND Power over Ethernet (PoE/PoE+) devices, all IP-enabled devices connect to existing data networks, allowing simultaneous broadcasting to both phones and speakers. The ZON-LO is easy to install. All it requires is a PoE CAT 5 connection to a network (up to 300 feet), no power cord needed. The AND ZONE-LO also features full multicast and broadcast support. Easily send audio to individual, multiple, or all devices simultaneously (when combined with additional AND zone controllers). The AND ZON-LO Zone Line Out Controller even contains a sound masking feature. Generate a configurable pink noise via push button or program and you're good to go.

Advanced Networks Devices ZONE-LO Features

• Configurable volume
• Field upgradeable
• No power cord needed
• Ful multicast and broadcast support
• Unbalanced line level audio via RCA connector
• Line Out signal level up to 2 Vpp
• Generate pink noise via button or program
• 10/100 Mbps
• PoE (IEEE802.3af) 15.4 W or PoE+ (IEEE802.3at) 30.0 W
• SIP, IPv1, HTTP, SLP, TFTP, NTP, SNMPV1 & SNMPV2c, DHCP, IGMP, ICMP, TCP/IP, UDP, MDNS & MDNS-SD