Netgear GS748TP ProSafe 48-Port 10/100/1000 Smart PoE Switch

Netgear GS748TP ProSafe 48-Port 10/100/1000 Smart PoE Switch

NETGEAR ProSafe Smart Switches fill the gap between unmanaged and fully managed switches. The family of ProSafe Smart Switches is designed for growing businesses that want control over their network without the cost and complexity of a full Layer 2 management implementation. These PoE-capable Smart Switches, the GS724TP and GS748TP, provide power and data using built-in IEEE 802.3af PoE on all 24 or 48 ports. In addition, they offer an intuitive Web-based management tool for quick and easy deployment and configuration making it ideal for deploying access points, VoIP phones and IP-based surveillance cameras.

Netgear GS748TP ProSafe 48-Port 10/100/1000 Smart PoE Switch with 2 Combo Gigabit Copper/SFP Slots and Web-based Configuration

The Netgear GS724TP and GS748TP are equipped with highly advanced features such as access control lists (ACL), 802.1x port authentication, enhanced QoS, rate limiting and IGMP snooping among others to provide a small and medium-sized business with a network that is geared for growth, while providing scalability and reliability. With the utility of 24 or 48 10/100/1000 Mbps ports, two or four combination (copper/hot-swappable small form-factor pluggable (SFP)) Gigabit ports for optional fiber connectivity, growing business networks, classrooms and workgroups can benefit from superior performance and keep up with expanding network needs. These high-performing Netgear Smart Switches feature a non-blocking wire-speed architecture with a 48 Gbps or 96 Gbps switching capacity for maximum data throughput.

Netgear GS748TP Features

Network Protocol and Standards Compatibility

• IEEE 802.3 10BASE-T
• IEEE 802.3u 100BASE-TX
• IEEE 802.3ab 1000BASE-T
• IEEE 802.3z 1000BASE-X
• IEEE 802.3x full-duplex flow control
• IEEE 802.3af (Power over Ethernet)

Power Supply

• Power Consumption: GS724TP – 260W; GS748TP – 570W
• 100-240VAC/50-60 Hz universal input
• PoE Budget: GS724TP 192W; GS748TP 384W

Network Ports

• GS748TP: 48 10/100/1000 Mbps auto-sensing, Gigabit Ethernet, 4 combo Gigabit copper/SFP slots

Physical Specifications

GS724TP

• Dimensions (w x d x h): 440 x 257 x 43 mm (17.3 x 10.1 x 1.6 in)
• Weight: 3.7 kg (8.1 lb)

GS748TP

• Dimensions (w x d x h): 440 x 387 x 43 mm (17.3 x 15.2 x 1.6 in)
• Weight: 6.6 kg (14.5 lb)

Performance Specifications

• Forwarding modes: Store-and-forward
• Bandwidth: GS724TP: 48 Gbps; GS748TP: 96 Gbps
• Network latency: <2,900 ns for 64-byte frames in store-and-forward mode for 1,000 Mbps to 1,000 Mbps transmission
• Buffer memory: 3 Mb per system
• Address database size: 4,000 media access control (MAC) addresses per system
• Addressing: 48-bit MAC address
• Mean time between failure (MTBF): GS724TP: 165,589 hours (~19 years); GS748TP: 147,559 hours (~17 years)
• Acoustic noise: GS724TP 46.5 dB; GS748TP 44.8 dB

Electromagnetic Emissions

• CE mark, commercial
• FCC Part 15 Class A
• VCCI Class A
• C-Tick

Environmental Specifications

• Operating temperature: 32° to 104° F (0° to 50° C)
• Storage temperature: -4° to 158° F (-20° to 70° C)
• Operating humidity: 90% maximum relative humidity, non-condensing
• Storage humidity: 95% maximum relative humidity, non-condensing
• Operating altitude: 10,000 ft (3,000 m) maximum
• Storage altitude: 10,000 ft (3,000 m) maximum

LEDs

• Per port: (10/100 and Gigabit): Link/activity, speed
• Per device: Power
• Per device: Fan failure
• Per PoE ports: PoE power, PoE fault

Electromagnetic Immunity

• EN 55024

Safety

• CE mark, commercial
• cUL IEC950/EN60950

Administrative Switch Management

• IEEE 802.1Q static VLAN (128 groups, static)
• Voice VLAN
• IEEE 802.1p Class of Service (CoS)
• Port-based QoS
• DSCP-based QoS
• IEEE802.3ad link aggregation (manual or LACP)
• IEEE 802.1D Spanning Tree Protocol
• IEEE 802.1w Rapid Spanning Tree Protocol
• SNMP v1, v2c, v3
• RFC 1213 MIB II
• RFC 1643 Ethernet interface MIB
• RFC 1493 bridge MIB
• RMON group 1, 2, 3, 9
• RFC 2131 DHCP client
• IEEE 802.1x
• Jumbo frame support
• Port-based security by locked MAC addresses
• Layer 2 and 3 ACLs
• Storm control for broadcast, multicast and unknown unicast packets
• IGMP snooping v1/v2
• Port-based ingress rate limiting
• SNTP
• Port mirroring support (many to one)
• Web-based configuration
• Configuration backup/restore
• Password access control
• RADIUS support
• TACACS+ support
• Syslog
• Firmware upgradeable

Modules

• AGM731F 1000BASE-SX SFP Module
• AGM732F 1000BASE-LX SFP Module
• AGM733 1000BASE-ZX SFP Module

Warranty

• NETGEAR Lifetime Warranty†

ProSupport Service Packs Available

• PMB0332 – OnCall 24x7, advanced tech support with next-business-day HW replacement (3 Years)
• PRR0332-100 – XPressHW, next-business-day HW replacement (3 Years)

Package Contents

• 24-port or 48-port Smart Switch with Gigabit Ports and PoE (GS724TP or GS748TP)
• Rubber footpads
• Power cord
• Rack-mount kit
• Resource CD
• Installation guide
• Warranty/support information card